When your ceiling fan-lights stop working, to the reason why they stop, the response isn’t usually as clear-cut as a burned out lamp. Electric cables contract and can enlarge. Loose cable connections can be caused by this everywhere in the wall switch to the package. Damaged outlets as well as a pull chain switch that is busted also can make the fan’s lights to quit functioning. Making a few repairs and assessing several connections could possibly get your ceiling fan-lights functioning once more.
Assess Ceiling Fan Light Outlets for Harm
Throw to the ceiling fan circuit off the circuit-breaker.
Take away in the ceiling fan light outlet. Examine the lightbulb for filaments that are damaged.
Hold a non-contact voltage tester in the outlet that is light. If electricity is found the tester lights up.
Add a light bulb outlet cleaning brush to the ceiling fan-light outlet to wash any corrosion in the sides of the outlet. Wipe the interior of the outlet using a cloth that is soft.
Add a small screwdriver underneath the the steel tab in the outlet. Pry the tablature up somewhat.
Replace the incandescent lamp to the ceiling fan-light outlet. Turn the circuit breaker again to power the ceiling fan.
Test Ceiling Fan Wall Switch Wiring
Turn on the change for those who got two switches that control the light and fan individually, resulting in the ceiling fanlight.
Hold a non-contact voltage tester from the light change. If electricity is found the tester lights up. Switch off the breaker providing the ceiling fan with electricity main electric panel in the event the examiner doesn’t light.
Eliminate the screws holding the switch cover plate on light switches and the ceiling fan. Take away at the underparts of the the switch as well as the top of the ceiling fan light change. Carefully pull on the swap in the carton in the wall.
Look for 2 black cables connected to the face of the change that is light. These cables are fastened beneath the screws on the right or left side of the change. Replace the cable that is black if it h AS come free. Tighten the swap screws on the right or left side of the change.
Follow the black cables connected to the ceiling fanlight switch-back to the box. Seek out cable connectors which could join the wires from your switch to some other cable that is black. Twist the connector ensuring the cables are linked.
Replace the switch in the box. Replace the protect over the switches. Turn on the breaker to the ceiling enthusiast.
Assess Ceiling Fan Cable Connections
Throw to the ceiling fan circuit off the circuit-breaker.
Take away in the canopy on top of the ceiling enthusiast. The canopy addresses the wiring box and hanging mount and rests contrary to the ceiling. Lower the canopy and permit it relaxation contrary to the ceiling enthusiast motor.
Hold a non-contact voltage tester against each cable within the box. The examiner doesn’t light in the event you turned off the breaker that is best.
Assess the wires being held by the connectors to the cables in the box from your ceiling fan. Wriggle each on clock-wise to ensure they can be tight.
Replace the canopy. Turn on the breaker to the ceiling enthusiast.
Examine the Light Package Wire Connections
Switch off the ceiling lover circuit-breaker.
Take away the screws keeping the ceiling fan-light kit to the ceiling enthusiast. The screws can be found beneath the lover blades right over the underside edge of the swap casing.
Lower the kit from your casing. Examine the wire connections in the casing. Tighten any free connections and change the mild package.
Throw the breaker back to the ceiling lover.
Replace the Pull Chain Mild Swap
Switch off the ceiling enthusiast circuit-breaker in the breaker panel.
Take away the screws keeping the package that is light to the ceiling enthusiast. Pull on the kit from your switch casing to get the wire connectors.
Untwist the connectors from both wires linking the package that is mild to the ceiling enthusiast. Pull on the wires aside release a the kit that is light and transfer it for your work area.
Try to find the two cables running from your pull chain mild change. One cable connects to the ceiling lover, while the other links to the outlet that is light. Untwist the connecter holding the swap cable to the ceiling fanlight outlet.
Untwist the nut keeping the pull-chain swap to the package. The nut is threaded throughout by the chain in the switch, as well as the nut can be found on the not in the package that is mild. Pull on the swap that is outdated in the kit and add an alternative pull-chain swap to the kit. Fix the switch that is newest to the package together with the nut you eliminated in the first.
Fit one in the outlet of the black cables from your switch to the cable. Link with all the wire connector you removed from your initial pull chain mild swap to two cables.
Install the kit that is mild again on the ceiling lover by reversing the measures used to take it off. Turn on the circuit breaker.